How to Install Computer RAM or Random Access Memory

  First post by: www.itsbattery.com

You don’t have to worry if you don’t know how to install a RAM. This guide will help you how to properly install a RAM the Hp laptop battery proper way. If you are planning to upgrade your RAM there are some things you need to know first before you proceed with this guide. We hope that you already know some basic information like: available RAM your pc have, RAM size you want to add, RAM type, Tools, warranty as well as the slot where your RAM will be placed.


You will usually find Computer RAM in multiples of 16 megabytes: 16, 32, 64, 128, 256, 512, 1024. Don’t be confused with 1024 megabytes because it is the same as 1GB RAM. The prices of computer RAM today are way lot cheaper compare before and even the available capacity of RAM in the market are larger. Some stores will advice you to get a 1GB RAM for a new computer Hp pavilion dv6000 battery system. That will enable you to play games and other kind of applications.


One important thing to remember when buying a new RAM is to check what kind of RAM your computer supports. You can find this info by checking the manual of the motherboard that comes with the product when you bought it. I highly advice to you contact the manufacturer if you don’t know what kind of RAM that your computer supports or ask your geek friend to come and help you. It is very important to know this because placing the wrong type of RAM in the slot can cause damage to your system and even ruin the card itself.


Your RAM options will depend on the design of your motherboard and don’t forget to unplug your Hp dv6000 battery computer when you are installing RAM because it can also ruin both your computer and the RAM that you are installing. All the information that you need to know about your motherboard and what kind of RAM it needs and supports can be found in the manual.


Installation

1.Turn off and unplug your computer then disconnect all the other devices such as monitor, keyboard and mouse before you open the case.

2.It’s a good practice to first ground your self by using an anti-static pad or wrist strap. This can help discharge any static electricity in you because static can damage your computer.

3.Using a screwdriver or nut-driver open the computer caseHp Pavilion dv8000 battery . You don’t need those tools if you have a tool-less cases that uses thumbscrews or simple latch.

4.Now locate the RAM in your motherboard. Its pretty easy to find the RAM. They are green rectangle boards with circuits on them. You will see it in slots like your other components but smaller and has little clamps holding them in place.

1.» If replacing a ram, gently unlock the retaining clips before you pull the RAM. Once the clamps are no longer locked all you have to do is pull the RAM away from then inset the new one.

1.» Its easy to place the new RAM. Place the RAM in the slot. Do not forget to match it with the notch found in the RAM and the slot. Then gently insert the RAM inside the slot. You need to push it a little to insert it into the slot. Make sure the clamps click in.

5.Once you have placed the new RAM you can place back the case again as well as the other devices that you previously removed in your Hp dv8000 battery pc.

6.You will know if you did it right when you start up the computer. It will recognize the new ram immediately.

7.If your computer doesn’t recognize the new ram that you just added usually the computer won’t boot or you just will have whatever RAM you have left in the case. If that happens just double check the ram and make sure that it is placed securely in the slot then reboot your pc Hp HSTNN-DB20 battery again.